arXiv:2601.13766v2 Announce Type: replace Abstract: BULLKID-DM is an experiment designed for the direct searches of particle dark matter candidates with mass around 1 GeV, or below, and cross-section with nucleons smaller than $10^{-40}$ cm$^2$. The detector consists of a stack of diced silicon wafers, acting as arrays of particle absorbers, sensed by multiplexed Kinetic Inductance Detectors. The target will amount to 800 g subdivided in more than 2000 silicon dice, with the aim of controlling the background from natural radioactivity by creating a fully active structure and by applying…
arXiv:2611.17364v1 Announce Type: new Abstract: This study investigates neutron flux redistribution and the shadowing effect between control rods during rod-worth measurements using the rod-drop experiment. A simulation-based instrumental calibration methodology is proposed to account for spatial effects on neutron detector responses and improve the accuracy of reactivity measurements. The IPEN/MB-01 research reactor was modeled using the MCNP Monte Carlo neutron transport code. Reactivity behavior during the initial transient of the rod-drop experiment (t < 10 s) was evaluated and compared…
arXiv:2611.17356v1 Announce Type: new Abstract: With the rapid development of high-sampling-rate digital nuclear devices, their applications in nuclear facilities and related fields become more acceptable, and will possibly become widespread due to the versatility and flexibility of waveform sampling systems. When digitizers reach hundreds of megahertz or gigahertz, their lower limit in time measurement probes into the sub-nanosecond region, expediting their use in a bunch of time-critical scenarios. While conventional algorithms coupled with digital sampling techniques realize fair pulse…
arXiv:2611.17351v1 Announce Type: new Abstract: Knowledge of the neutron flux distribution is essential for safe and effective reactor utilisation. In the SAFARI-1 research reactor, a set of axial flux profiles are periodically measured by activating natural copper wires inserted along the height of the fuel or control assemblies and subsequently measuring their activity using a sodium iodide detector. Improper wire insertion can, however, result in profiles that do not accurately represent the actual neutron flux distribution. Building on previously identified potential indicators of…